Publications

  • Journal Publications

    1. Davis, E., Ndao, S., “On the Wetting States of Low Melting Point Metal Galinstan® on Silicon Microsctructured Surfaces,” Advanced Engineering Materials, 1700829, 2017
    1. Elzouka, M., Ndao, S., “Meshed Doped Silicon Photonic Crystals for Manipulating Near-Field Thermal Radiation,” Journal of Quantitative Spectroscopy & Radiative Transfer, 204, 56-62, 2018
    1. Hamed, A., Ndao, S., “High Anisotropy Metamaterial Heat Spreader," International Journal of Heat and Mass Transfer, Under Review, 2017
    1. Hamed, A., Ndao, S., “Modeling of writable thin film liquid metal phase change material for electronics cooling," IEEE Transactions on Components, Packaging and Manufacturing Technology, Under Review, 2017
    1. Kruse, C., Lucis, M., Shield, J., Anderson, T., Zuhlke, C., Alexander, D., Gogos, G., Ndao, S., “Effects of Femtosecond Laser Surface Processed Self-Organized Nanoparticles on Pool Boiling Heat Transfer Performance,” to appear in Applied Thermal Engineering, 2017
    1. Elzouka, M., Ndao, S., “High Temperature Near-Field NanoThermoMechanical Rectification,” Nature Scientific Reports, 7, 44901, 2017
    1. Davis, E., Liu, Y., Jiang, L., Lu, Y., Ndao, S., “Wetting Characteristics of 3-Dimensional Nanostructured Fractal Surfaces,” Applied Surface Science, 392, Pages 929–935, 2017
    1. Kruse,C., Tsubaki, A., Zuhlke, C., Anderson, T., Alexander, D., Gogos, G., Ndao, S., “Secondary Pool Boiling Effects,” Applied Physics Letters, 108.5, 0516022016
    1. Hassebrook, A., Kruse, C., Wilson, C., Anderson, T., Zuhlke, C., Alexander, D., Gogos, G., Ndao, S., “Effects of Droplet Diameter and Fluid Properties on the Leidenfrost Temperature of Polished and Micro/Nanostructured Surfaces,” Journal of Heat Transfer, 138.5 : 051501, 2016
    1. Ems, H., Ndao, S., “Microstructure-alone induced transition from hydrophilic to hydrophobic wetting state on Silicon,” Applied Surface Science, 339, pp. 137–143, 2015
    1. Kruse, C., Somanas, I., Anderson, T., Wilson, C., Zuhlke, C., Alexander, D., Gogos, G., Ndao, S., “Self-Propelled Droplets on Heated Surfaces with Angled Self-Assembled Micro/Nanostructures,” Microfluidics and Nanofluidics, 18 (5), pp 1417-1424, 2015
    1. Elzouka, M., Ndao, S., “Towards A Near-Field Concentrated Solar Thermophotovoltaic Microsystem: Part I - Modeling,” Solar Energy,  2015
    1. Kruse, C., Wilson, C., Anderson, T., Zuhlke, C., Alexander, D., Gogos, G., Ndao, S., “Enhanced Pool-Boiling Heat Transfer and Critical Heat Flux on Femtosecond Laser Processed Stainless Steel Surfaces ,” International Journal of Heat and Mass Transfer, 82, pp. 109–116, 2015
    1. Elzouka, M., Ndao, S., “Near-Field NanoThermoMechanical Memory,” Applied Physics Letters, 105, 243510, 2014
    1. Ndao, S., Peles, Y., and Jensen, M. K., “Micro device design and fabrication for the experimental investigation of jet impingement on an array of micro pin fins,” Journal of Micromechanics and Microengineering, 24 105005, 2014
    1. Ndao, S., Peles, Y., and Jensen, M. K., “Effects of pin fin shape and configuration on the single-phase heat transfer characteristics of jet impingement on micro pin fins,” International Journal of Heat and Mass Transfer, 70, pp. 856-863, 2014
    1. Kruse, C., Anderson, T., Wilson, C., Zuhlke, C., Alexander, D., Gogos, G., Ndao, S., “Extraordinary Shifts of the Leidenfrost Temperature from Multiscale Micro/Nanostructured Surfaces," Langmuir, 29 (31), pp 9798–9806, 2013
    1. Ndao, S., Jensen, K. F., Velmahos, G., King, D. R., "Design and demonstration of a battery-less fluid warmer for combat", Journal of Special Operations Medicine, 13 (3), pp. 31-5, 2013
    1. Rinnerbauer, V. Ndao, S., Yeng, Y. X., Bermel, P., Senkevich, J., Jensen K. F., Joannopoulos, J. D., Soljačić, M., and Celanovic, I., “Large-area fabrication of high aspect ratio tantalum photonic crystals for high-temperature selective emitters,” Journal of Vacuum Science & Technology B, 31, 011802, 2013
    1. Rinnerbauer, V., Ndao, S., Yeng, Y. X., Bermel, P., Senkevich, J., Celanovic, I., and Soljačić, M., “Recent developments in high-temperature photonic crystals,” Energy Environmental Science, 5 (10), pp. 8815 – 8823, 2012
    1. Ndao, S., Peles, Y., and Jensen, M. K., “Experimental investigation of flow boiling heat transfer of jet impingement on smooth and micro structured surfaces,” International Journal of Heat and Mass Transfer, 55(19-20), pp. 5093–5101, 2012
    1. Ndao, S., Lee, H. J., Peles, Y., and Jensen, M. K., “Heat transfer enhancement from micro pin fins subjected to an impinging jet,” International Journal of Heat and Mass Transfer, 55(1-3), pp. 413-421, 2012
    1. Basu S., Ndao S., Michna G. J., Peles Y., and Jensen M. K., “Flow boiling of R134a in circular microtubes. Part II: study of critical heat flux condition,” Journal of Heat Transfer, 133(5), 051503, 2011
    1. Basu S., Ndao S., Michna G.J., Peles Y., and Jensen M. K., “Flow boiling of R134a in circular microtubes. Part I: study of heat transfer characteristics,” Journal of Heat Transfer, 133(5), 051502, 2011
    1. Ndao, S., Peles, Y., and Jensen M. K., “Multi-objective thermal design optimization and comparative analysis of electronics cooling technologies," International Journal of Heat and Mass Transfer, 52(19-20), pp. 4317-4326, 2009
  • Conference proceedings

    1. Kruse, C., Peng, E., Zuhlke, C., Shield, J., Alexander, D., Gogos, G., Ndao, S., “Role of Copper Oxide Layer on Pool Boiling Performance with Femtosecond Laser Processed Surfaces," Proceedings of the ASME 2017 International Conference on Nanochannels, Microchannels, and Minichannels, Cambridge, Massachusetts, August 27 - 31, 2017
    1. Elzouka, M., Ndao, S., “NanoThermoMechanical Thermal Rectifier for high temperature thermal computing," IEEE Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (ITherm), Orlando, Florida, May 30 – June 2, 2017
    1. Elzouka, M., Ndao, S., “NanoThermoMechanical Memory: Near-Field Heat Transfer Enabled Negative Differential Thermal Resistance and Thermal Latching," IEEE Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (ITherm), Las Vegas, NV, May 31 – June 3, 2016
    1. Kruse, C., Anderson, T., Zuhlke, C., Alexander, D., Gogos, G., Ndao, S., “Study of secondary pool boiling effects with functionalized surfaces created via Femtosecond Laser Surface Processing," IEEE Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (ITherm), Las Vegas, NV, May 31 – June 3, 2016
    1. Hassebrook, A., Lucis, M., Shield, J., Zuhlke, C., Anderson, T., Alexander, D., Gogos, G., Ndao, S., “Thermal Stability of rare earth oxide coated superhydrophobic microstructured metallic surfaces,” ASME 2015 InterPACKICNMM, San Francisco, California, July 2015
    1. Zuhlke, C. A., Tsubaki, A., Kruse, C., Anderson, T., Wang, X., Downer, M. C., Gogos, G., Ndao, S., Alexander, D., "Self-Organized Micro/Nanostructure Formation on Critical Heat Transfer Materials Using Femtosecond Laser Surface Processing," ASME 2015 InterPACKICNMM, San Francisco, California, July 2015
    1. Kruse, C., Anderson, T., Zuhlke, C., Alexander, D., Gogos, G., Ndao, S., “Pool Boiling Heat Transfer Enhancement with Metallic Femtosecond Laser Processed Surfaces: Study of Nanoparticle Effects,” 9th International Conference on Boiling and Condensation Heat Transfer, Boulder, Colorado, April 2015
    1. Elzouka, M., Kulsreshath, M., Ndao, S., “Modeling of Near-Field Concentrated Solar Thermophotovoltaic Microsystem," Proceedings of the ASME 2014 International Mechanical Engineering Congress & Exposition, Montreal, Quebec, Canada, November 2014
    1. Ems, H., Ndao, S., “Fabrication of Inverted Trapezoidal Microstructures for Heat Transfer and Microfluidics Applications," 12th International Conference on Nanochannels, microchannels, and Minichannels, Chicago, Illinois, August 2014
    1. Kruse, C., Anderson, T., Wilson, C., Zuhlke, C., Alexander, D., Gogos, G., Ndao, S., “Enhanced Pool-Boiling Heat Transfer and Critical Heat Flux Using Femtosecond Laser Surface Processing," IEEE Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (ITherm), Orlando, Florida, May 2014
    1. Hassebrook, A., Kruse, C., Wilson, C., Anderson, T., Zuhlke, C., Alexander, D., Gogos, G., Ndao, S., “Effects of Droplet Diameter on the Leidenfrost Temperature of Laser Processed Multiscale Structured Surfaces," IEEE Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (ITherm), Orlando, Florida, May 2014
    1. Anderson, T., Zuhlke, C. A., Kruse, C., Wilson, C., Hassebrook, A., Somanas, I., Ndao, S., Gogos, G., Alexander, D., "Tailoring liquid/solid interfacial energy transfer: fabrication and application of multiscale metallic surfaces with engineered heat transfer and electrolysis properties via femtosecond laser surface processing techniques," SPIE Photonics West, San Francisco, California, February 1-6 2014
    1. Anderson, T., Zuhlke, C., Wilson, C., Kruse, C., Ndao, S., Gogos, G., Alexander, D., "Understanding of the physics and material dynamics of multipulse femtosecond laser interactions with surfaces," Proc. SPIE 8885, Laser-Induced Damage in Optical Materials, 888518, November 14, 2013
    1. Kruse, C., Anderson, T., Alexander, D., Gogos, G., Ndao, S., “Controlling the Leidenfrost temperature through laser-assisted surface micro/nano texturing," ASME Summer Heat Transfer Conference, Minneapolis, Minnesota, July 2013
    1. Basu S., Ndao S., Michna G. J., Peles Y., Jensen M. K., “Study of CHF condition for flow boiling of R134a in circular microchannels,” 14th International Heat Transfer Conference (IHTC-14), Washington DC, August 8-13 2010
    1. Basu S., Ndao S., Michna G. J., Peles Y., Jensen M. K., “Heat transfer characteristics of flow boiling of R134a in uniformly heated horizontal circular microtubes,” 14th International Heat Transfer Conference (IHTC-14), Washington DC, August 8-13 2010
    1. Ndao, S., Peles, Y., and Jensen, M. K., “A genetic algorithm based multi-objective thermal design optimization of liquid cooled offset strip fin heat sinks," ASME Summer Heat Transfer Conference, San Francisco, CA, HT2009-88039, July 19-23 2009